M01Sample
5 axis machining centre
Axes5TravelX 000 · Y 000 · Z 000 mmTableØ 000 mm
AluminiumStainlessTitanium
Contract CNC machining · Bursa, Türkiye
Send the drawing. The rest is down to the micron.
Arvek machines parts to your drawing: CNC turning, 5 axis milling, wire EDM and grinding. Every machine is listed with its sizes and our tolerance limits are stated plainly. Upload your drawing securely and follow your quote stage by stage.
STEP, IGES, DXF, DWG, PDF
NDA on request
Quote status you can follow
T01 · Capabilities
Which process, for which part
Every process has its own page; here are the short versions.
- T01
CNC turning
Shafts, flanges, bushes and fittings; C and Y axis milling in the same setup.
- T02
CNC milling and 5 axis
Housings, covers and fixture parts; fewer setups on complex surfaces.
- T03
Wire EDM
Sharp internal corners, narrow slots and precise profiles in hardened steel.
- T04
Grinding
Cylindrical and surface grinding for tight tolerances and low roughness.
- T05
Welding and assembly
Done in house. Outsourced steps such as plating get their own quote line.
T02 · Machines
Machine by machine, with real sizes
See whether your part fits here, not on the phone.
All machine values are placeholders. On a real site make, model and sizes come from the shop's machine list; nothing unconfirmed is guessed.
M02Sample
Vertical machining centre
Axes3TravelX 0000 · Y 000 · Z 000 mmTable0000 × 000 mm
AluminiumCarbon steelPlastics
M03Sample
CNC lathe with C and Y axis
AxesX · Z · C · YTurning dia.Ø 000 mmTurning length000 mm
StainlessCarbon steelBrass
M04Sample
Sliding head lathe
BarØ 00 mmPart length000 mmTooling00 stations
StainlessBrassTitanium
M05Sample
Wire EDM
TravelX 000 · Y 000 mmPart height000 mmWireØ 0.00 mm
Tool steelHardened steel
M06Sample
Cylindrical grinder
Grinding dia.Ø 000 mmGrinding length000 mmBetween centres0000 mm
Hardened steelStainless
T03 · Tolerances
How far may an untoleranced dimension deviate?
Dimensions without an individual tolerance follow the general class in the title block, most often ISO 2768-1: f fine, m medium, c coarse, v very coarse.
Specific tolerances (for example Ø20 H7) are machined to that value and reported separately. The band a shop holds comfortably comes, on a real site, from its own inspection records.
± 0,2mm
Example size30 mm → 29,8 … 30,2
Source: ISO 2768-1 general tolerances, linear dimensions. Class v is not defined for 0.5 to 3 mm.
Ra 6.3µm
Ra 3.2µm
Ra 1.6µm
Ra 0.8µm
Ra 0.4µm
Surface roughness is specified on the drawing as an Ra value.
T04 · RFQ portal
Upload the drawing and settle the rest in one form
Everything the estimator needs, and nothing more.
T05 · Quote tracking
Know which stage your request is at
After you submit, you get a request code and the expected quote date in writing, then a short email at every stage.
Sample screen
RFQ · 0000
Sample request · flange, revision C
- Request receivedRequest code issued.
- Engineering reviewChecked against the machine list.
- Questions, if anyAnything unclear is asked first.
- Quote in preparationQuantities, lead time, outsourced steps.
- Quote sentIn your inbox, tied to the revision.
T06 · Quality and documents
The documents your quality team will ask for, in one place
Documents here are placeholders; a real site only shows documents the shop holds, with scope and expiry date.
Quality management certificate
Only if held, with expiry date.
Inspection report
A sample page for critical dimensions.
First article inspection
Every dimension checked on the first part.
Material certificate
From the supplier, on request.
The inspection room, in real photos
- Inspection equipment and calibration schedule
- Goods in, in process and final inspection
- How non conforming parts are handled
T07 · Principles
We never overstate capability, and we treat drawings as entrusted
In contract machining, trust is built on clearly written limits rather than promises.
We write down our limits
The size limit is on the page, not revealed on the phone.
Your drawing is entrusted to us
Who saw the file and how long it is kept: answered in writing on request.
One contact
Your request stays with one person from start to finish.
Nothing outsourced is hidden
Heat treatment or plating done elsewhere gets its own quote line.
T08 · FAQ
Before you send a drawing
The questions engineers and buyers ask us most often.
Is it safe to upload my drawing?
Files arrive encrypted and are stored where only the quoting team can open them, never in a public folder. The privacy notice states who has access and how long files are kept; you can ask for deletion after quoting.
Do you sign NDAs?
Yes, on request. Switch on the confidentiality step and upload our agreement signed, or send your own template. The drawing is not reviewed before that.
How are untoleranced dimensions machined?
To the general tolerance class in the title block, usually ISO 2768. If none is stated, we use the class chosen in the form and say so in the quote.
Do you take prototypes and small batches?
Yes. Prototypes, small batches and repeat orders come through the same form; ask for several quantities and each gets its own quote line.
When will I get the quote?
The expected date is in the email confirming your request. If something is missing, we ask first; you get an email at every stage.
T09 · Contact
Talk to us even if the drawing is not ready yet
Send a short note about a part at the idea stage or a repeat order.
- Phone+90 000 000 00 00
- WhatsApp+90 000 000 00 00
- Emailhello@arvek.example
- LocationBursa, Türkiye
- Opening hoursWeekdays 08:30 to 18:00